CRANE CO

Assembler- $33.91

CRANE CO

10 H-1B approvals (2022)Elyria, Ohio, USFull-timePosted 1 week ago

Job Description

Crane Aerospace and Electronics has an exciting opportunity for an Assembler - 1st Shift at our Elyria, OH location.

Hours are Monday-Friday 6:30am-3:00pm.

About Crane

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You’ll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).

Our Crane Aerospace & Electronics Elyria facility has been a bedrock in the community-friendly town of Elyria, Ohio, for more than a century. Known for our excellence in pumping technology, our Elyria site produced the first-ever positive displacement pump for high performance piston engine aircraft and even supplied pumps for Charles Lindbergh in the 1930s. We have more than 150,000 fuel and lubrication pumps in service today and are proud to offer custom thermal management system solutions for a range of next-gen applications. Start the next chapter of your career with Crane Aerospace & Electronics!

Essential Functions

  • Assemble intricate and expansive products with many close-fitting components which require considerable fitting, aligning and adjusting to very close tolerances.
  • Perform all operations necessary for the completion of assembly of product.
  • Perform braze and solder operations including preliminary sequences such as, but not limited to, cut and strip wires, application of stop-off, machine set-up.
  • Perform stack load verification of assembled and partially assembled pumps.
  • Mix paint, lacquer, enamel, etc., to required consistency and apply as specified.
  • Advise supervision of any measuring equipment in need of calibration and remove the equipment to make available for calibration as required.
  • Must possess common hand tools necessary to perform job.
  • Perform minor deburr work as required.
  • Clean and move parts as necessary.
  • Pass an annual eye exam.
  • Responsible for product verification and process control including using necessary measuring devices.
  • Keep charts and records as required on completed sequences and processes.
  • Rotate to different workstations within the cell.
  • Perform required rework, secondary operations, routine maintenance per Appendix A, and appropriate safety checks in the cell.
  • Document all non-conformances through specified data collection procedures.
  • Inspect work and verify that product meets all appropriate standards at each operational step in the cell.
  • Complete all required paperwork.
  • Ensure all material is properly cleaned, identified, protected, and stacked prior to movement.
  • Work with internal and external customers and suppliers and participate in continuous improvement activities as required.
  • Complete all required documentation including but not limited to operator inspection records, job routers, NCR’s, reject tags, move tickets, and stock tickets.
  • Perform other duties as assigned by department supervisor.
  • Utilize computers to access various databases.

Minimum Qualifications

- High School Diploma;

- Prior assembly experience preferred.

- Must have basic reading and writing skills

- Requires basic math skills to make necessary calculations such as adding, subtracting, multiplying, dividing, and percentages.

- Must be able to read and interpret blueprints, detail sheets, test procedures, manufacturing outlines, and written instructions;

- Adequate mechanical aptitude.

- Requires prolonged periods of standing, bending, lifting, and stretching;

- Requires lifting parts, fixtures, and containers up to 50 pounds up to a height of 3 feet;

- Must be able to work with assorted hand tools in close quarters and awkward positions with firm grip;

- Must be able to operate manual arbor press with pulling force up to 200 pounds;

- Requires lifting parts and fixtures weighing up to 70 pounds and carry load 3 feet.

- Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).

Working Conditions

  • Manufacturing shop floor environment;
  • Greasy, oil environment;
  • High noise levels in some test conditions;
  • Paint, solvent, adhesive vapors, oil mist;
  • High temperature equipment, piping, and ovens;
  • May be required to occasionally wear half face piece respirator.

Top Benefits

As a team member at Crane Aerospace and Electronics, you’ll enjoy:

- Benefits: Health care, dental or life insurance starting the first day of the month

- Education Reimbursement: eligible after 6 months of employment

You can see a list of our benefits at https://www.craneae.com/company/careers or visit our website at www.CraneAE.com for more information on our company and great opportunities.

We are committed to operational excellence and world class processes.  We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check.  FAA sensitive positions require employees to participate in a random drug test pool.

#LI-WS1 #CAE

Hourly range: $33.91. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Apply (Original)

ApplyWave is not an employer or a recruitment agency. You apply to each employer directly — we find their contact and write your letter. Real employers never charge money for a job or a visa sponsorship.

CRANE CO
CRANE CO

USCIS H-1B data hub

Sponsored before

  • 2022H-1B · West Simsbury10
  • 2021H-1B · Stamford32
  • 2020H-1B · Stamford22
  • 2019H-1B · Stamford20
  • 2018H-1B · Stamford18

9 more on the company page

View Company Profile

AI Resume Tailoring

23%
Before
87%
After

Example

Tailor your resume for Assembler- $33.91 roles

  • Scores your fit against the posting's own requirements
  • Pulls the skills and keywords it names into your bullets
  • Exports as PDF or Word, ready to submit

AI Cover Letters for Assembler- $33.91

Generate tailored cover letters, recruiter emails, and LinkedIn messages matched to your resume.

Cover Letter
250-350 words, 4 paragraphs
LinkedIn Message
300 chars, casual tone
Follow-up Email
100-150 words, concise
  • Tailored to your resume & job
  • Cover letters, emails, LinkedIn messages
  • Professional tone, your experience
Try AI Cover Letters (free)→

Your toolkit for landing Assembler- $33.91 roles

AI Resume Tailoring
Recruiter Finder
Job Radar Alerts
Application Tracker